風機CASE SHOW

SHA-L-800離心風機彈簧減震器

服務內容：SHA-L-800離心風機彈簧減震器

簡介：SHA-L-800離心風機彈簧減震器 Spring damper of centrifugal fan 上海淞江減震器集團有限公司官方網站為您介紹：SHA-L-800離心風機彈簧減震器信息，淞江集團為離心風機推薦專用的減震器產品：SHA型低頻阻尼......

SHA-L-800離心風機彈簧減震器
Spring damper of centrifugal fan

上海淞江減震器集團有限公司官方網站為您介紹：SHA-L-800離心風機彈簧減震器信息，淞江集團為離心風機推薦專用的減震器產品：SHA型低頻阻尼可調式彈簧減震器，為風機降低震動和噪音。
Shanghai Songjiang absorber group limited official website for your introduction: SHA-L-800 centrifugal fan spring shock absorber, Songjiang group for centrifugal fan absorber special recommended products: SHA type low frequency damping adjustable shock absorber spring, wind vibration and noise reduction.

SHA-L-800離心風機彈簧減震器又稱風機減震器具有結構簡單，安裝方便等特點，減振器上下端各有螺絲及螺絲孔，彈簧上端有高度調節螺母，可根據安裝需要自由調整高度，減震器兩端有側向橡膠阻尼，加大了垂向的阻尼系數，提高了縱向和橫向的剛度，確保設備能更安全的運行。

SHA-L-800離心風機彈簧減震器本體材質分為鋁合金，重量輕便，強度高，并經嚴格老化測試，品質優良，安全性高。鋁合金本體經高溫噴塑處理，耐候性強。外型輕巧堅固，安裝簡單；適用于各類機械內減震裝置。彈簧均經熱處理、ED防銹、烤漆等程序處理。荷重撓度25mm、40mm能有效消除機械結構振動。

新款SHA型減震器本體上刻有淞江集團logo作為防偽標識。

The body material of sha-l-800 centrifugal fan spring shock absorber is divided into aluminum alloy, which has light weight and high strength. After strict aging test, it has excellent quality and high safety. The aluminum alloy body is sprayed with plastic at high temperature, which has strong weather resistance. Light and solid appearance, simple installation; It is applicable to all kinds of mechanical internal damping devices. The springs are treated by heat treatment, ed rust prevention, paint baking and other procedures. The load deflection of 25mm and 40mm can effectively eliminate the vibration of mechanical structure.

The new Sha shock absorber body is engraved with the logo of Songjiang group as an anti-counterfeiting logo.

以下是SHA-L-800離心風機彈簧減震器外形尺寸和其他型號表：
The following is the shape size and other type of SHA type low frequency damping spring damper.

SHA-L-800離心風機彈簧減震器主要特點與用途：

采用高強度鋁合金材質,具有載荷范圍寬，固有頻率低，安裝方便等優點。減振器上部配有上螺栓與設備固定，下部可與地基固定：設有高度調節螺栓，可以調節設備水平，并采用側向阻尼，提高了縱、橫向水平的剛度(阻尼比>0.065)。

應用領域：空調箱、排送風機、風車、小型冰水機組、水泵、發電機組、一般產業機械組。

使用現場：EBARA臥式雙吸蝸殼泵減震器

Main features and uses of products

The JB type low frequency adjustable damping spring damper adopts the material of high strength ductile iron, which has the advantages of wide load range, low natural frequency and convenient installation. The upper part of the shock absorber is equipped with upper bolts and equipment fixed, and the lower part can be fixed with the foundation. It has a height adjusting bolt, which can adjust the equipment level and use lateral damping to improve the horizontal and horizontal stiffness (damping ratio >0.065).

Application areas: air conditioning box, exhaust fan, windmill. Small ice water unit, water pump. The generator set, the general industrial machinery group.

以上SHA-L-800離心風機彈簧減震器信息來源于上海淞江減震器集團有限公司官方網站減震器產品中心，如需了解更多請點擊：風機彈簧減震器

The above SHA-L-800 centrifugal fan spring shock absorber information comes from Shanghai Songjiang shock absorber Group Co., Ltd. official website shock absorber product center. For more information, please click:

相關鏈接：SHA型可調阻尼彈簧減震器安裝說明

原創文章如轉載，請注明本文鏈接: http://m.tlbon.com/1457.html 瀏覽：11,963

下一篇: SHA-M-500坐式風機阻尼彈簧減震器